| Project Title | Drive-point Injection System for In-Situ DNAPL Remediation |
| Track Code | 8810-7178 |
| Short Description | A passive non-mechanical system for injecting oxidants into contaminated soil formations for the remediation of dense non-aqueous phase liquids. |
| Abstract | None |
| |
| Tags | alternative, applications, borehole, contaminants, contaminated, contamination, cost, dense, depth, displaced, dnapl, down-gradient, draw, drive-point, elliptical lenses, environment, environmental, flushing, footprint, formations, gas, government, groundwater, hollow, horizontal, hydrogen peroxide, immiscible, in-situ, industrial, inject, injecting, injection, inwood, lateral, liquids, mechanical, migrate, mitigation, nitrogen, non-aqueous, non-mechanical, oxidant, oxidants, passive, permanganate, phase, pockets, potassium, pumping equipment, pumps, reduce, reduction, remediating, remediation, serial injections, soil, sustainable development, system, technique, techniques, technology, tool, up-gradient, water, well screen, wells, zone |
| |
| Posted Date | Mar 19, 2009 2:51 PM |
The system relies on pressure injection of potassium permanganate oxidant down a hollow drive-point tool, fitted with approx. 3 inches of well screen above the tip.
The drive-point is positioned at a depth above the DNAPL contamination so that the dense permanganate solution can migrate laterally and horizontally downward into the contamination zone.
As DNAPL is very immiscible in water, typically the DNAPL contamination is found in pockets or elliptical lenses in the soil formation.
In order to effectively cover a range of depths where disparate zones of DNAPL may be located, the drive-point tool easily can easily accommodate serial injections at various depths down a single borehole.
The system relies on gas (ie. nitrogen) pressure injection and thus requires no pumps or electricity and thus offers cost effective, passive, and non-disruptive treatment of DNAPL contamination.
Areas of application for this technology include the remediation of soil formations contaminated by dense non-aqueous phase liquids (DNAPL).
The in-situ DNAPL treatment system has been successfully field tested at the Canadian Forces Base Borden groundwater test aquifer location.
The technology is presently available for licensing.
Traditionally, soil formations contaminated by DNAPL (dense non-aqueous
phase liquids) have been treated by flushing the contaminated zone with
oxidants, such as hydrogen peroxide or potassium permanganate.
Flushing involves using mechanical pumps to inject the oxidants
up-gradient of the contaminated zone and to draw off displaced water
down-gradient thereby leaving the oxidants in-situ to destroy the DNAPL
contamination. Aside from relying on costly pumping equipment and the
necessity of nearby electrical service, this technique is somewhat
turbulent and increases the chances of spreading DNAPL contamination in
both lateral and horizontal directions thereby potentially increasing
the overall footprint of the contaminated zone.
In effort to reduce overall remediation costs and overcome the current
disruptive disadvantages of flushing techniques, researchers at the
University of Waterloo have developed a passive non-mechanical system
for injecting oxidants into contaminated soil formations for the
purpose of remediating DNAPL.